SfCutters Reviews is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 1 Best Prime Home Direct Ice Makers in 2022 [December Update]

SfCutter Team Member
  Dec 8, 2022 4:22 PM

Below, you'll find a list of the top 1 Prime Home Direct Ice Makers available to buy in 2022, as chosen by the experts at SfCutters Reviews.

We sort them using feedback from 2,122 satisfied buyers. Well-known corporations like Prime Home Direct produce these.

You can use the table of features and rankings below to help you choose between the various product versions:


Top 1 Best Prime Home Direct Ice Maker

Showing  1 - 1  in  1 results
TOP Choice
1
  • SCORE
    9.0
    AI Score

    The SfCutters Reviews AI Score rating method was established by our skilled group of professionals. Our SfCutters Reviews tool gives each product a score between 0 and 10 based on the information that was obtained. There is no connection or influence between the websites of any manufacturer or sales agency and this score in any way. Learn more

  • Brand
    Prime Home Direct

Last update on 2022-12-08 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API


Buying Guide

Ice being available whenever one desires or requires it is a luxury that we all take for granted, that is, until the moment that one reaches into the freezer for some ice and discovers that there is none.

The Ice Makers are broken. Having a refrigerator that includes an ice maker comes with the unavoidable drawback of having to deal with this issue.

One positive aspect is that ice makers are generally straightforward appliances that, for the most part, all carry out their functions in the same manner. In addition, you might be able to diagnose the problem and make the necessary repairs to a defective ice maker on your own, saving you the cost of an expensive service call.

Here is how to address some of the more typical issues with ice makers:

During times when ice is not being expelled

If you discover ice inside the ice mold, it indicates that your ice maker is receiving water, so the issue most likely isn't with the water supply. If you don't find ice inside the ice mold, the water supply may be the issue. Instead, it is most likely a problem with the mechanical or electrical components of the system.

Cause: When shifting things around in the freezer, it's pretty uncommon for people to inadvertently shove the control arm into the off position, which stops the formation of ice. 

  • Fix: This is a simple problem to fix. Find the metal control arm and move it so that it is on or down, depending on the situation.

Cause: Problem with the motor, the gearbox, or the electrical connection if the control arm is in the on position (down) and the mold is full with ice.

  • Fix: Check to see that all of the electrical connections are securely seated. Pull the refrigerator away from the wall, then turn off the valve that supplies it with water and unplug it from the power source. Find the socket that allows for rapid release on the other side of the freezer's back wall. To check that the connection is secure and complete, unplug it and then plug it back in.
  • Add some water to the mold, wait one minute, and then manually remove any residual ice from the mold using the method described above. The ice will start to melt, making it significantly simpler to remove it.
  • The electricity needs to be turned back on to the refrigerator, and the control arm needs to be moved so that it is in the off position. Bring the control arm back to its original position, and then wait for the solenoid to engage and the mold to be filled with water. This should take around ten seconds.
  • After the ice has been allowed to solidify for three to four hours, check to see if it is now able to eject. If this is not the case, you will most likely need to replace either the motor or the gearbox.

Whenever there is no ice being produced

If your ice maker is creating crescents or cubes that are smaller than usual, this is almost always an indication that there is a clog somewhere along the supply line. If your ice maker isn't producing any ice at all, this could also be an indication of a clog.

Cause: Frozen water in the line is a common source of clogs and is one of the most common causes overall.

  • Fix: Slide the refrigerator to the side and unplug it in order to repair a line that has frozen over. Find the valve that shuts off the water supply. It is usually located either behind the refrigerator or underneath the sink. Position the valve so that it is closed, often known as the "off" position. Warm water should be poured over the water line using a turkey baster that has been filled with warm water. You also have the option of using a hair dryer to defrost the water line or allowing the refrigerator to sit unplugged for a period of time that is greater than two hours.
  • After the power has been restored to the refrigerator, check to see if the ice tray is being filled by the water supply.
  • If the clog is anything other than translucent, you should seek the assistance of a professional when attempting to remove it.

Cause: There is also the potential that the ice maker's water filter is clogged, which would explain the problem.

  • Fix: Find the water filter and replace it if it has been moved. Inside of the refrigerator is normally where one will find the filters for ice producers (to keep them from freezing).

When cubes are too big or small

Cause: If the ice crescents are too large or if there is no clog but they are still too little, the ice maker probably just needs a little bit of tweaking. If the ice crescents are too large:

  • Fix: Remove the cover of the ice maker before making any adjustments to the amount of water that is poured into the ice mold at the end of each cycle. It's the white plate that's attached to the very front of the ice machine assembly, and you should be able to remove it with relative ease. If you are having trouble removing it, try using a screwdriver with a flat head to pull it away from the housing in a careful manner.
  • You should be able to find a screw and spring assembly underneath the lid, in addition to a plus and minus indicator. This regulates how much water is added to a tank. Turn the dial toward the minus sign to reduce the quantity of water used in each dose. Turn it in the opposite direction toward the plus sign to increase the amount of water used in each dose.

Outro

If you're looking for the Best Prime Home Direct Ice Makers, SfCutters Reviews has compiled a list of the top products so you can choose the one that's ideal for you quickly and easily.

Our criteria for choosing things have always been that they be true, suitable for their intended use, functional, and reasonably priced, providing real benefit to the people who buy them. Wishing you a pleasant day of retail therapy. Keep on reading the rest of our evaluations. The time you've spent reading this is greatly appreciated.


4.5
2 ratings